|
|
Products |
|
PRINTING MACHINERY |
  |
|
|
< Back |
KBC Make Rotary Screen Printing Machine
Most important Features:
- It consists of floating bearing system.
- Screen handling is very easy.
- Space saving design.
- Easy screen running due to 1:1 gear ratio.
- Any repeat possible between 500 to 1018 mm.
- Step less width variation between maximum & minimum printing width.
- Magnet roller squeegee guarantees absolute even color application over the whole of the involved printing surface
- Floating bearing system, light running screen head bearings with micro gearing device enables a single sided screen drive up to 3250 mm. printing width.
- Printer can choose conventional magnetic roller squeegee, suitable for most applications.
Printing Width |
1250, 1550, 1850, 2550, 2850, 3250, & 4000 mm |
Printing Repeat |
640, 820, 914, 1018 |
Printing Speed |
4 to 8 mtrs. / min. |
No. of Colours |
8, 12 & 16. |
Suitability of Cloth |
Cotton, Viscos, Polyester, Knitted, Synthetics, Chiffon etc. |
Drive of the Machine |
AC Variable Drive |
Nature of Current |
380V / 415V U + 5% |
Connected Load |
70 / 115 Kw. |
Water Consumption |
40 to 60 Liters min. approximate |
|
< Back |
KBC Make Gum Cooking Pan
CONSISTING OF:
- The Cooking Pan will have jacketed type vessel.
- Jacketed vessel will have stainless steel sheet from inside and mild steel plate from outside.
- The size of the vessel will be as per the capacity of the cooking pan.
- The main vessel of the stainless steel will be fabricated from S.S. material while outer side will be fabricated from M.S. Plate.
- There will be 40mm clear gap in between the M.S. & S.S. vessel.
- The vessel will have two shaft ends supporting arrangement.
- It will be rested on suitable cast iron housing, the whole unit will be mounted on M.S. stand.
- For tilting the main vessel, one special arrangement of worm and worm wheel will be provided.
- Necessary connections of steam inlet, and outlet, safety valve, air vent and pressure gauge will be provided.
- One S.S. stirrer will be provided. It will be directly coupled with suitable geared motor.
- The S.S. stirrer will have one S.S. shaft and suitable S.S. stirrer blades.
|
< Back |
KBC Make Gas Dryer for Printed Fabrics
- Drying chamber is provided to dry heavily printed woven and knitted fabrics.
- Effective nozzle drying systems give a high drying capacity and uniform distribution of the hot air over the entire surface of the fabrics.
Drying takes place in 1,3 or 5 passages.
- Suitable exhaust fans are provided.
- Easy accessibility to all parts of the system by door along both sides is provided
No. of Chambers |
3 / 4 / 5 / 6 |
No. of Exhaust |
2 / 3 / 4 individually driven |
No. of Pass |
1 / 3 / 5 |
Evaporating Capacity |
450 to 1250 kgs / cm2 |
Installed Power Required for Dryer |
Approx. 50 - 60 HP. |
|
< Back |
KBC Make Colour Pump
- Stainless steel body.
- Double diaphragm pneumatic colour pump for power saving, colour saving and suction of very high viscosity colours.
- Suitable for all printing machines in the world.
|
|
|