CONSISTING:

• Wide Mouth High Pressure Kier with accessories suitable for Fabric.
• KBC Pre-heater with accessories.
• KBC Pumping set.
  

• Capacity of the Vessel: 500 - 1500 kgs.
• Test Pressure 50 psi hydraulically.
• Working Pressure 30 ps

KBC PREHEATER

• Test Pressure 50 psi hydraulically
• Working Pressure 30 psi

KBC PUMPING SET:

• Suitable Motor without any starter

CONSISTING:

• One No. Hank Dyeing Machine (Cabinet Type) capacity with a set of trolley with sticks.
• KBC Hank Dyeing machine works under static pressure and high temperature. The liquor ratio approx. 1:15. The machine is fabricated from 304Q / 316Q stainless steel.
• The machine is equipped with main cabinet, preparation tank, coil type Heat Exchanger, Quick Drain Valve, an arrangement of closing doors. Digital Temp. Indicator and Controller will be provided.
• For perfect distribution of dye liquor a suitable turbo propeller fitted on S.S. Shaft with suitable bearings and bearing housing is provided. For driving the propeller a suitable TEFC electric motor with V-pulley and belt will be provided.
• One control panel board equipped with timers, forward-reverse two way switch, electric accessories for automatic and manual operation, push button and signal lights will be provided.
• Machine is available from 25 to 300 Kgs./ Batch Capacity.

KBC Make Jigger Machine

SALIENT FEATURE:  

• The frame is quite sturdy and make of fine grain cast iron.
• The main rollers are made from Mild Steel seamless pipe coated with Ebonite.
• The differential Bevel gears in the gear box are manufactured from special steel duly case hardened fitted with GM Bush for long life without any wear and tear.
• Specially make Ratchet Brakes with proper Brake liners control the entire tension of the fabric. Ball Bearing type Brake Drum can be provided on request.
• Perfectly balanced heavy duty floating device with 2 Stainless Steel guide rollers running on bush bearing are provided to prevent the cloth from any tension.
• Stainless Steel non magnetic of 304 quality 16 guage is utilized for the trough with direct Stainless Steel coil and Stainless Steel guide rollers. (Indirect coil on pequets).
• Jiggers can be supplied in width of 48", 60", 66", 72", 84" & 96" to 120".
• The machine is provided with electric motor, panel, push button starter of standard make.
  

KBC Make 3 Point Hydro-Extractor for Loose Fibre, Hank & Fabric

CONSISTING:

CONSISTING OF:  

• Basket
• Outer Shell & Bottom of the machine
• Bearing Housing
• Suspension
• Drive
• Brake Assembly
• Automation ( If required )

KBC Make 4 Point Hydro-Extractor for Loose Fibre, Hank & Fabric

CONSISTING:

• Basket
• Outer Shell & Bottom of the machine
• Bearing Housing
• Suspension
• Drive
• Brake Assembly
• Automation ( If required )

KBC Make 3 Point Hydro-Extractor Spindle Type

• Basket
• Outer Shell & Bottom of the machine
• Bearing Housing
• Suspension
• Drive
• Brake Assembly
• Automation ( If required )

CONSISTING :

• Basket
• Outer Shell & Bottom of the machine
• Bearing Housing
• Suspension with Visco Dampers
• Drive
• Brake Assembly
• Automation (If required)

CONSISTING OF:

• Basket
• Outer Shell & Bottom of the machine
• Bearing Housing
• Suspension
• Drive
• Brake Assembly
• Automation ( If required )

KBC Make 4 Point Hydro-Extractor Cake Type

CONSISTING OF:

• CONSISTING OF:
• Basket
• Outer Shell & Bottom of the machine
• Bearing Housing
• Suspension of Visco Dampers
• Drive
• Brake Assembly
• Automation ( If required )

KBC Make Wet Fibre Opener Machine

Wet Cotton/Fibre Opener Consists of following:-

• Mild Steel Side Walls.
• A pair of teeth type rolls.
• Main drum.
• Drive.
• Guard cover.
• Mild Steel Side Walls.

Machine consisting of two mild steel side walls having four nos. M.s fabricated tie bars to prevents vibrations. Both the side walls are fitted on the sturdy base.

A pair of teeth type Rolls.

A pair of two nos. positive driven teeth type rolls are mounted on the m.s side walls with bush bearings to open the fibre lumps efficiently.

Main drum.

One No. main big size high speed driven drum having spike strips is mounted on side walls with suitable ball bearings. Spike strips will open the fibre and thrown out from the machine.

Drive.

One no. 3HP electric motor with necessary ‘V’ Belt pulley will be provided at the rare side of the machine to drive complete machine.

Guard Cover.

Suitable M.S fabricated guards are bolted with the machine to feed the fibre in the machine and to get opened material from the machine.

KBC make Chamber Dryer consisting of:

• Machine consists of mild steel chamber enclosed with necessary insulating walls consisting of double metal clad panels with thick intermediate insulating layers for reducing heat losses. The outside panel is of mild steel.
• The machine is divided into two sections, one section for loading of the material to be dried and the other section for steam heating radiators.
• The material to be dried is to be loaded on the trolley and put in the drying section as under:
• For drying Loose Fibre Suitable Tray with Trolley will be provided.
• For yarn in hank aluminium pipes are supplied. Trolley is so designed that pipes can be arranged on it.
• Hanks are loaded on pipes on trolley, which is put in the drying section.
• For drying cones or cheeses wound on metallic tubes or loose materials of muffs, Hanger Trolley will be provided.
• For loading and unloading of the chamber iron trolleys will be supplied and these trolleys are so designed that the fully loaded trolleys can be pushed inside the chamber. For guiding trolley inside the chamber, rails are provided at the bottom of the chamber.
• High efficiency steam heated radiators of the required capacity having gilled pipes are provided and the radiators are hydraulically tested so that they can be safely used for a working steam pressure of about 100 lbs. Per sq. inch . Our delivery does not include steam valves and steam traps.
• For the purpose of circulating hot air, air circulating fans with the required ducting are provided on the top of the chamber. The fan sucks air from the material drying section and delivers it to the heating section so that the air after passing over the radiators and getting sufficiently hot will again pass through the material drying section.
• An outlet arrangement with a butterfly valve is also provided in the air circulating arrangement so that part of the moist air coming out of the chamber can be delivered to the atmosphere. Our delivery does not include any ducting arrangement for discharging the air outside the machine. The butterfly valve can be conveniently operated by a hand lever.
• Air circulating fans are driven by suitable electric motor ( As per capacity ) each and our delivery includes the necessary ele. Motor.
• A thermometer is provided for indicating the temperature inside the chamber.
  Machine is available up to 500 Kgs./ Batch.

KBC Make Continuous Fibre Dryer

KBC make Continuous Fibre Dryer will consists of:-

DRYING SECTION.

• Drying sections of Mild Steel Chambers totally enclosed with insulating panels fabricated from double metal clad section with thick insulating material sandwiched between two covers.
• Each chamber consists of two sections. One houses conveyor and radiators while the other houses fan, fan housing and duct line.
• Each chamber is provided with the thermometer.
• Framework is fabricated from commercial structural steels as per standard engineering structural practice.
• Each section is a unit by itself. Addition of section later is very easy

CONVEYOR

A conveyor of 1600mm width fabricated from perforated zinc coated CRC sheets duly reinforced, strengthened at the bottom and mounted on the conveyor chain. Conveyor is moved on sprocket wheels, which are situated outside the chamber.

AIR CIRCULATING UNIT

Air circulating unit consists of strong, sturdy and balanced fans, fan housings and duct line fabricated from CRC sheets and duly painted with heat resisting aluminum paint.

STEAM RADIATORS

Steam heated radiators having gilled pipes of the required capacity tested hydraulically up-to safe working of super heated steam pressure of 100 psi and painted with heat resisting aluminum paint.

DRIVE.

Drive consists of 3 HP A.C motor with suitable gear box and necessary spur gear with inverter control drive will be supplied along with machine.

KBC Make Auto-Clave

USEFUL FOR :

Auto Clave Machine is suitable for Yarn Twist Setting in Hank, Cheese and Bobbin Form, available from 50 Kgs. To 450 Kgs. Capacity per Batch.

KBC Make Branding Machine

CONSISTING :

• Single-head construction.
• Braid head with individual drive.
• Robust construction for continuous operation.
• Optimum cost-performance ratio.
• Low maintenance required.
• Suitable for 5 mm. to 8 mm. braid

KBC Make Stirrers

CONSISTING OF:

• Extra set of mounting arrangement for stirrer on your tankwill be provided.